$4.00
These are the STL files for making a 3D printed mounting bracket for a Raspberry Pi and a Falcon F8 Distro board v1.02 or newer, including the latest revision featuring e-fuses that attaches to a Meanwell LRS-350 or LRS-600 power supply. The LRS-350 version also features dimples that can be drilled out to accommodate a variety of generic 350W power supplies, offering additional flexibility. The mount features our press fit standoffs which lock into place and greatly simplify installation as you no longer have loose standoffs that can shift when positioning the boards. They need to be printed separately from the primary mount and then aligned over the openings on the deck of the mount and finally simply tapped gently into place until fully seated and secure using a small hammer or mallet. The mounting holes are self-threading with the Raspberry Pi using 4-40 x 1/2″ screws and the Falcon F8 Distro board using 6-32 x 1/2″ screws and the mount attaches to the sides of the power supply using four M4 x 8mm screws. Compatible with our Ammo Box Mounting System v3 and Voltage display mounts.
Note: This is a digital purchase for STL files and not a physical product.
Note tolerances on the press fit standoffs are extremely sensitive and a printer that is slightly over extruding or under extruding may produce a fit that is too tight or too loose. If the standoff fit is not satisfactory most slicers include dimensional compensation controls that can be applied to the standoff parts to correct for small variations and achieve the proper press fit.
You must be logged in to post a review.
Reviews
There are no reviews yet.