Singing Tree with Santa Hat Mounts

3D Printed mounting system for the Gilbert Engineering Singing Tree with Santa Hat, 61″ tall x 46″ wide. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized to fit 1/2″ EMT conduit and are designed to be zip tied to the coro. The junction points between the vertical and horizontal sections of conduit are made using 1/2″ PVC fittings along with our bushings which allow the smaller EMT to fit within the PVC fitting. The upper junction points are made with 2x 90 degree PVC elbows and the lower junction points are made with 2x PVC tee fittings.

For ground installations 1/2″ rebar can be driven into the ground and the EMT can slide over the rebar to hold the prop in place. At a minimum the rebar should go into the ground at least 24″ and extend into the prop 24″. Guy wires or additional EMT structure like the one illustrated is highly recommended for those that experience winds. Please select whether your prop has the reenforcing backer plates or not. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only, PVC fittings are available at most home centers. More information below.